Dental ScrewsDriversBroken Screws Removal Kit Dental Screw Drivers Tools DASK

  

US 3 in 1 Dental Locator Core Tool for Legacy Locater Multi-Function Core Tool. Universal Prosthetic Restoration Hand Driver Removal Kit Dental Screw Drivers. US Universal Prosthetic Hand Driver Kit Dental Broken Screw Removal Kits. 2Pcs Dental Hex 1.2 Hand Drivers ScrewDriver Long & Short.

3 in 1 Dental Locator Core Tool Metal Handle Tool. US Dental Hand Driver Kit Screw Driver Handle Tool 16Pcs Drivers Short & Long. Dental 3 in 1 Handle tool Locator Core Tool. Dental DASK SINUS Kit Advanced Lift Drills Stoppers Elevation Instrument Set. Dental Advanced Sinus Kit Drill Stoppers Hand Instrument DASK. US Dental WEN Tension Release Comb WTRC Basic Advance Professional HELMUT ZEPF. Dental Abutment Driver Screwdriver Manual Torque Ratchet Wrench Hand Tools.

6/8Pcs Dental Screw Drivers Abutment Kit FRI ANT ANK OSS DEN ITI NOB ICX. Universal Prosthetic Restoration Hand Driver Tool Kit Dental Implant Hand Tool. XM SD Torque Wrench Kit. Simple & easy access to sinus cavity. Broad exposure of bony walls with special instruments DASK is an advanced sinus lifting kit.

The drills are internally irrigated, designed to create hydraulic pressure that protects the sinus membrane when drilling. The DASK kit contains 3 drills for the lateral approach, 3 drills for the crystal approach, 4 drill stoppers and 4 sinus hand instruments. The drills are internally irrigated to create an umbrella effect to reduce the risk of a potential perforation to the sinus. DASK Drill #1 XRT 332035.

Crestal Approac DASK Drill #2 XRT 372035 DASK Drill #3. DASK Drill #4 XRT 064025 Lateral Approach DASK Drill #5 XRT 084025 DASK Drill #6. DASK Drill #15 : Drill speed 800 to 1,200 rpm, 3045Ncm with internal irrigation DASK Drill #6 : Drill speed 800 to 1,200 rpm, 3045Ncm with external irrigation Stopper For XRT332035, XRT372035, XED331035D Drilling DepthLArt. NO XSE1L XSE2L XSE3L XSE4L. DASK is a all-in-one kit for different sinus lifting technique. Having this advanced sinus kit will enable you to perform all necessary type of sinus lifting technique. With wide range of drills, safety stopper and elevating instrument. Simple & easy access to sinus cavity. Broad exposure of bony walls with special instruments. Sinus lifting solution tool for crestal and lateral approach+ wide range of elevators. DASK kit is designed for both crestal approach and lateral approach. Kit components consist of drilling for crestal approach, lateral windows technique and lateral wall off technique sinus lift. GRT332035 3.3mm diameter - DASK drill #1. GRT372035 3.7mm diameter - DASK drill #2. GED331035 3.3mm diameter - DASK drill #3.

The distance from the alveolar crest to the sinus floor should be measured on x-rays prior to surgery. Site preparation is performed with final drills in sequence up to 1mm short of the sinus floor. Then DASK Drill #1 or #2 is used and the sinus floor is carefully approached with light apical pressure. When you feel the yielding of the sinus floor, remove the drill. Or, partial preparations with DASK Drill #1 or #2 and up-fracture with osteotomes can be performed.

When the sinus cavity is accessed, DASK Drill #3 is introduced and a much broader detachment from the sinus floor can be facilitated horizontally with hydraulic pressure thanks to the internal irrigation hole. DASK Drill #3 can also be used for a lateral approach surgery.

GRT064025 6.0mm diameter - DASK drill #4. GRT084025 8.0mm diameter - DASK drill #5. GST083025 8.0mm diameter - DASK drill #6. To make a lateral window through the antrostomy (thin-out) approach. DASK Drill #4 or #5 is used to prepare a lateral sinus window using light pressure and rotating stokes. The DASK Drill #4 or #5 is designed to minimize the risk of sinus membrane perforation. To make a lateral window through the wall-off technique. DASK Drill #6 is used to cut and detach a bony island like a trephine bur from the lateral wall. Uncontrolled overdrilling may lead to sinus perforation and possible damage to the membrane.

External irrigation is necessary when drilling. DASK Drill #15 : Drill speed 800 to 1,200 rpm, 3045Ncm with internal irrigation DASK Drill #6 : Drill speed 800 to 1,200 rpm, 3045Ncm with external irrigation.

GFT02 Drilling Depth 10.5mm. GFT04 Drilling Depth 12.5mm. GFT06 Drilling Depth 14.5mm. GFT08 Drilling Depth 16.5mm. 1.2 Hex Drivers Compatible Nobel Biocare, 3I, Keystone, Megagen, Hiossen, Dentium.

1.27 Hex Drivers Compatible Zimmer, Astra, BioHorizons, Intr-Lock, MIS, SteriOss, Sybron, Implant Direct, PerioSeal. Prosthetic tools encompasses tools required for common implant procedures ex implant crown multi-unit abutment, implant over denture. This is a surgical tool that removes a screw that has become fractured inside the Fixture. After selecting the size that is appropriate for the size of the screw that is to be removed, it must be used by connecting a guide to the Fixture (Conical/Internal/External Guide). Then it is connected to the Shank Driver, and the fractured screw can be removed by rotating by hand in the reverse direction.

If the fractured screw cannot be removed using the Claw, it must be removed using the Reverse Drill and the Screw Remover. This is a tool that creates a hole on the fractured face of the Screw that will be used by. After selecting the appropriate Reverse Drill for the size of the screw that needs to be. Removed, it must be used by connecting a guide for the fi xture Perfect/ Conical/Internal/. The depth of the drill can be adjusted from 1 mm to 3 mm, because.

The Drill body has markings. The removal of an M1.6 size Screw Should utilize the Claw. Although diff erent manufacturers produce diff erent sizes of abutment screws, except in. Rare cases, typically they utilize screws of Size M1.6, M1.8, M2.0, or M2.5.'M' stands for a metric screw.

The number indicates the external size of the screw. Example, "M1.6 Screw" indicates that it is a metric screw the external diameter of Wh. This is a device that removes a fractured screw. Insert a Screw Remover that is. Appropriate for the size of the hole that has been formed using the Reverse Drill and. Rotate at a low speed (at or below 80 rpm) in the reverse direction.

The Screw Remover was designed in a tapered shape so as to increase, as it turns, the. Amount of friction, which is necessary to loosen the Screw. This is a surgical tool that was designed to be connected to the Screw Remover to allow the use of the hand, Torque Wrench, or Ratchet. Perfect Guide & PG Hand Driver.

The Perfect Guide acts as a Guide for the Reverse Drill. It is used when the screw is fractured at the lower part of the female screw inside the Fixture.

It is connected to PG Hand Driver and is directly applied to the Fixture female Screw. The Perfect Guide can be safely used because it has a stop structure inside that prevents the Reverse Drill from drilling more than 2 mm. They act as the Guide when using the Reverse Drill. They are used when the Perfect Guide cannot be used, or if the screw was fractured at a location deeper than 2 mm into the lower part of the female screw inside the Fixture.

The Guide appropriate for connecting to the Fixture must be selected. This can be easily affixed to the Fixture by connecting it to the 3.5 Double Hex part of the. Conical, Internal, or External Guide.

The implant fixture and fractured screw removal kit is the only kit you need to remove failed dental implants and fractured screws. Remove a fractured/broken screw and save the implant, or. Remove a failed implant while minimizing trauma to the bone. Fixture removal drills FRD-01 (mini), FRD-02 (regular), FRD-03 (Wide), Adapter 1. Screw removal guide 3i Internal NP, 3i Internal RP, External mini, External Regular, ITI Octa, Nobel Replace Tri-Lobe RP, Nobel Replace Tri-Lobe WP, Nobel Replace Tri-Lobe NP, Zimmer TSV 3.7/4.7, Zimmer TSV 5.7, Astra Hex, Noble Active NP, Noble Active RP, FRW-01 Wrench.

Screw Removal Drill & Tap SRD-01, SRT-01, SRT-02 (Wide), SRA-01(Adapter). Fixture Removal Trephine Bur FRT-3.7/4.4 (Ø3.5), FRT-3.9/4.6 (Ø3.7), FRT-4.3/5.0(Ø4.1), FRT-4.7/5.4 (Ø4.5), FRT-5.2/5.9 (Ø5.0), FRT-5.7/6.4 (Ø5.5), FRT-6.2/6.9 (Ø6.0), SRG-H, Adapter H.